2024 Pottinger Servo 4000 PN (5)

2024 Pottinger SERVO 4000 PN (5)

A straightforward and intuitive control centre, an extremely robust turnover mechanism and a durable plough beam as well as optimised mounting geometry, these are all essential factors that were taken into account during the development of the SERVO 4000. Teamed up with proven mouldboards, these ploughs have been engineered to deliver perfect working results year after year.

Features may include:

• SERVOMATIC control centre

The main setting of the new SERVOMATIC control centre is based on the inside track width of the tractor. The pulling point is automatically adjusted by the optimised four-joint linkage. Thanks to the floating lower linkage, the plough aligns itself along the ideal tractor-plough pull line. Thanks to the neat layout of the control centre, each of the adjustment points is easily accessible. The front furrow width is easily adapted mechanically or hydraulically. The pulling point correction take place mechanically and in combination with a plough beam pivot cylinder is integrated into this function. The plough beam pivot cylinder guarantees easy turnover even with a high number of furrows and a large furrow width, while minimising wear.

• NOVA stone protection system

Uniform, trouble-free operation in areas with a high stone content and heavy soils is not a contradiction in terms thanks to the reliable NOVA stone protection system. A selection of highly resilient materials combined with finely controllable hydraulics makes the system an indispensable tool in extreme situations. Being able to work continuously while outputting high quality working results increases productivity and contributes to a higher area output.

• PLUS - hydraulic furrow width adjustment

Thanks to the PLUS system, it is possible to quickly adjust the furrow width during ploughing to work around obstacles, field edges and headlands. The different formation of the furrow ridges when changing the working width has agronomic advantages. When changing the working depth, it is also possible to quickly adjust the furrow width to maintain a consistent ridge shape. All specifications are met with a full adjustment range between 30 and 55 cm or 32 and 59 cm on each furrow, depending on the point-to-point spacing.

• Reliable components

The plough beam has been engineered to absorb the loads acting on it during operation even better. The large dimension main beam section easily transmits the pulling force and is bolted on both sides. Loosening of the bolted connection is prevented by maximum pre-tensioning torque. To ensure the high strength of the beam, holes have been reduced to a minimum. In addition, the ingenious construction protects all bearing points and mounted components by reducing the forces acting on them.

• Mounting and road Transport

The SERVO 4000 is attached to the tractor using a three-point linkage. In addition to the standard mounting axles in various categories, a mounting axle with double bearings and a steered axle are also available. The mounting axles can be adjusted in four positions using the lower linkage plates. Two slotted holes and two fixed holes are provided for mounting the top link. In addition, the TRACTION CONTROL unit can be integrated into the headstock.

• Customised mouldboards

Low drag resistance, well suited to working on slopes. Ideal for ploughing meadow and flat land with good furrow clearance. Suitable for higher forward speeds.